Search Results

The GPS Kit and Tape allows you to quickly identify tools by department or area. The color of the tape and caps allow you to mark any shaped tool quickly and easily! Just wrap it in tape, or stick a dot on it, depending on the tool shape. Makes it fast and easy to determine which department tools belong to e.g., wood shop (red), metal shop (yellow). Everything gets put back with no struggle, questions, or missing tools! GPS Tape is a super thin vinyl tape that has much better conformability than electrical tape.

The Layout Tape System is designed for the 32mm European style adjustable shelving. This system includes a 60' roll of Layout Tape and a Layout Drill Bit which allows you to drill precise, chip-free, 5mm holes at the correct depth every time.

The LEFT-HANDED ProCarpenter Tape Measure is mirrored, from our PSSR case, made specifically for ease of use for our LEFT-HANDED CUSTOMERS out on the shop floor. The tape measure has 7 innovative features: A lever action belt clip, a Pencil sharpener, a Dual locking system, an Erasable notepad, and a Heavy-duty 1-inch blade.

The Peel & Stick tape measure puts a tape rule right where you need it. The flat 16' long tape measure is printed on both sides allowing for a left or right read. Simply adhere to the included SpeedTape to one side of the tape and stick it on! Width of a tape measure is 7/8".

The ProCarpenter AutoLock tape measure has all the features of the original ProCarpenter Tape Measure, plus the autolock and super-ergonomic design. Simply pull the blade out and it stays in place then push the release button to retract the blade.

To see all our Tape Measures, press here.

Face it, not all surfaces are flat! The ProCarpenter FlatBack is a flexible tape for measuring curves and flat panels with precision and ease. Available in a Standard Story Pole, Metric/Standard, Old Standby Standard, Metric Reverse (True32), Standard Reverse (Lefty/Righty) blade styles.

To see all our Tape Measures, press here.

SpeedTape is FastCap's high-performance ultra-bond adhesive in a peel and stick roll! Apply SpeedTape to almost anything you want to stick in place. Peel off the liner and stick it! If you have a peel-and-stick application, SpeedTape is the answer.

Custom widths available: Call for custom widths up to 54"

The Adjustable Shelf Spacer eliminates the need for cutting up valuable plywood as temporary shelf spacers. Easily adjust to the height you need, place inside a cabinet and let it do the work of holding your shelf while you install. When your job is done it collapses down to 5 inches for easy storage.

NOT RECOMMEND FOR INSTALLATIONS OF LESS THAN 10 INCHES

Replacement Belt Clips for our Procarpenter Tape Measures, AutoLock Tape Measures, & FlatBack Tape Measures. 

The Burn One Tape Measure was designed to prevent you from making simple math mistakes when measuring. The blade has two inches of blank space followed by a zero line giving you complete accuracy without the need to subtract inches.

To see all our Tape Measures, press here.

Click here for Erasable Fastpad

Erasable FastPad Labels are made with a smooth, durable PVC finish that perfectly fit our Tape Measures. They are easy to modify and tailor specifically to your needs. Use a Sharpie™, grease pencil, or water-soluble pen.

2.25" in diameter, they come 4 to a sheet.

The Kliss Clamp and Kliss Clamp XL are innovative clamping systems designed by a cabinet maker. Kliss Clamp holds your panels upright so you can apply Fastedge, SpeedTape, or sand with ease, hands free! The Kliss Clamp XL is great for holding doors upright so you can mortise hinges and prep doors for installation.

*Scatch & Dent Kliss Clamp XL has small pin nail blowout and sanding marks. This does NOT impact the functionality. 

Nail Hole Tape features holes every two inches, allowing you to quickly mask nail holes before you fill them. Simply place a piece of tape over the nail hole, fill, peel, and sand. No more residue or discoloration! Each roll comes with enough tape to fill 300+ holes.

The Square One Tape Measure was designed to quickly help you find the hypotenuse (square) of anything. It has a dual scale; one side is a standard scale, the other side is an exaggerated hypotenuse scale. Zero math, zero mistakes.

To see all our Tape Measures, press here.

The ProCarpenter Tape Measures are developed with 7 innovative features: Lever action belt clip, Pencil sharpener, Dual locking system, Erasable notepad, Heavy-duty 1-inch blade (*excludes Metric/Standard 12' (PMS-12) & Standard/Standard Reverse 6' (PSSR-6 MINI)), High-contrast tape & Rugged compact design. Available in Old Standard, Standard Story Pole, Standard Reverse (Lefty/Righty), Metric Standard, & Metric Reverse (True32) blade styles.

To see all our Tape Measures, press here.

Click here for Erasable Fastpad

UPDATE: Now exclusively available on the Metric/Standard 16' & 25' tapes and the Standard/Standard Reverse 16' & 25' tapes is our Nylon wrapped blade: smoother action pull and retract, and MUCH higher abrasion resistance to keep your tape nicer for longer! 

Never have torn pants from your tape measure again. With the SpeedClip securing your tape measure is a breeze. It easily clips over your pants or belt and can even hold a pencil.

The Square N Tape eliminates the back and forth of marking and measuring with your tape and then drawing a line with your square. This all-in-one tool has 8 great features and cuts stud layout time in half!

The Square N Tape works great with FastCap's 16' ProCarpenter Tape Measures.

The 6’ Mini Standard/Standard Reverse (Lefty/Righty) is a tiny compact design that fits easily into your pocket! It has a magnet, erasable notepads and a super wide 5/8” blade on both sides.

Securely lock FastCap’s ProCarpenter Tape Measures to your belt with the Tape Measure Lock! A quick and easy 1-handed lock and release clip. It locks your tape measure in place and prevents it from being dropped or bumped off.

Check out our ProCarpenter Tape Measures & our FlatBack Tape Measures!

**Tape Measure Lock is not compatible with AutoLocks, PMS-12’ or PSSR-Mini tape measures**

The TapeNix is a temporary drawer pull solution available in reusable plastic or as a disposable peel-and-stick. Simply hook or stick onto your drawer front or cabinet door and you can open it easily. It can also be used as a 1/8" spacer.

The Peel & Stick TapeNix is made of .016" thick durable PVC. It is the most versatile temporary pull you will use and beats blue painter's tape because it is SUPER THIN, FAST TO APPLY and SUPER STRONG. Available in White or Aluminum. Also available in reusable plastic.

The Taper Lock, the first bit holder that really works; the harder you pull, the tighter it gets! This unique patented design uses a tapered spindle to firmly hold any bit in place. It also features a one-touch auto-lock for easy release of the bit with one hand. Works with any bit. Press here to see the Tip Magnet.

The perfect combination of polarity, strength and shape to make the Tip Magnet the most powerful Tip Magnet you will ever use. Whether at the base of a 1" tip or a 6" extended tip, the magnetic transfer picks up multiple screws with ease.

Press here to see the Taper Lock.